NET/MASTER RMS Management and Operations Guide

RMS9007
RMS Messages
A–106 115415 NonStop NET/MASTER RMS Management and Operations Guide
RMS9007 ERROR READING RESPONSE TO SHOW LOCKS/NCL: intread-error
Cause. An error occurred while you were attempting to retrieve a list of active subjects
or rule actions. intread-error is one of the following:
TIMEOUT
System loading problems caused a timeout to occur. Look for activities that may
cause the loading problems, and correct the problems before retrying.
MSGS LOST
Excessive RMS activities caused loss of messages. Either wait for the RMS
activities to subside before retrying, or issue the SYSPARMS NMIQLIM command
to increase the value of the NMIQLIM system parameter.
Effect. The action is not performed.
Recovery. Use the error text to determine the appropriate action to take.
RMS9009 SUBJECT THAW COMPLETE
Cause. You successfully thawed a frozen subject listed on your Frozen Message
Subjects panel using the T action code.
Effect. The selected subject is thawed.
Recovery. This message is informational only; no recovery action is necessary.
RMS9010 SUBJECT FREEZE COMPLETE
Cause. You successfully froze the subject specified on your Message Action Control
panel using option 3.
Effect. The specified subject (optionally qualified by a manager) is frozen.
Recovery. This message is informational only; no recovery action is necessary.
RMS9011 SUBJECT ALREADY FROZEN
Cause. You selected option 3 from your Message Action Control panel to freeze a
subject that was already frozen.
Effect. The specified subject remains frozen.
Recovery. This message is informational only; no recovery action is necessary.