NET/MASTER RMS Management and Operations Guide

RMS DISPLAY DELAYED
RMS Commands
B–6 115415 NonStop NET/MASTER RMS Management and Operations Guide
RMS DISPLAY
DELAYED
The RMS DISPLAY DELAYED command displays information about delayed message
actions. If you do not specify a subject or a manager, information about all delayed
message actions under all managers are displayed.
RMS DISPLAY DELAYED [ SUBJECT= subject [ MANAGER= manager ] ]
[ DETAIL={ YES | NO } ]
SUBJECT= subject
specifies the name of a subject and, additionally, names beginning with subject .
You can specify a subject from 1 through 34 characters long.
MANAGER= manager
specifies the name of the manager. You can specify a manager from 1 through 32
characters long.
If you specify a manager, only information about the delayed message actions (as
determined by the value of the subject) under the specified manager is displayed.
DETAIL
specifies whether to display detailed information about delayed message actions
in addition to limited information.
YES
specifies that detailed information is to be displayed. This supplements the
limited information described in DETAIL=NO. Messages RMS9031 through
RMS9037, described in Appendix A, “RMS Messages,” indicate the results of
this command.
NO
specifies that limited information is to be displayed. Messages RMS9031
through RMS9033 and message RMS9037, described in Appendix A, “RMS
Messages,” indicate the results of this command.
Consideration
You can use the EQUATE command to assign a lengthy command string to a single
character or sequence of characters. For example:
EQUATE DISD RMS DISPLAY DELAYED