NET/MASTER RMS Management and Operations Guide

RMS DISPLAY QUEUED
RMS Commands
115415 NonStop NET/MASTER RMS Management and Operations Guide B–9
RMS DISPLAY
QUEUED
The RMS DISPLAY QUEUED command displays information about rule actions
queued to a specific subject.
RMS DISPLAY QUEUED SUBJECT= subject [ MANAGER= manager ]
[ DETAIL={ YES | NO } ]
SUBJECT= subject
specifies the name of a subject. You can specify a subject from 1 through 34
characters long.
MANAGER= manager
specifies the name of the manager. You can specify a manager from 1 through 32
characters long.
If you specify a manager, only information about the rule actions queued to the
specified subject under the specified manager is displayed.
DETAIL
specifies whether to display detailed information about rule actions queued to a
specific subject in addition to limited information.
YES
specifies that detailed information is to be displayed. This supplements the
limited information described in DETAIL=NO. Messages RMS9021 through
RMS9028, described in Appendix A, “RMS Messages,” indicate the results of
this command.
NO
specifies that limited information is to be displayed. Messages RMS9021
through RMS9023 and message RMS9028, described in Appendix A, “RMS
Messages,” indicate the results of this command.
Consideration
You can use the EQUATE command to assign a lengthy command string to a single
character or sequence of characters. For example:
EQUATE DISQ RMS DISPLAY QUEUED