NET/MASTER RMS Management and Operations Guide

Making RMS Operational
Planning for, Installing, and Managing RMS
3–6 115415 NonStop NET/MASTER RMS Management and Operations Guide
Initialized,” later in this section, for information on how to verify that RMS is
successfully initialized.
4. When message NNM1005 appears, RMS is initialized and available on your
system. Log off from and then log on again to NonStop NET/MASTER MS. A
new NonStop NET/MASTER MS primary menu panel similar to the following
appears with the added option R:
SDPL------- NonStop NET/MASTER MS T6581D30 - 31OCT94 : Primary Menu -------SDPL
Select Option ===>
2 - Operator Control Services Userid NMTHY
8 - Edit Services Term #2007445
E - Console Extras Time 11:31:54
M - User ID Management Services MON 31-OCT-1994
R - Rule Management Services OPSYS GUARDIAN
U - User Services Window 1
X - Terminate Window.Exit
Last logged on MON 31-OCT-1994 10:22
at terminal $ATP4.#TERM1
5. Select option R to access Rule Management Services. A panel similar to the
following appears:
SDPL ---- NonStop NET/MASTER RMS T6583D30 - 31OCT94 : Primary Menu ----ZRMSMENP
Select Option ===>
1 - Start RMS Message Handler Userid NMTHY
2 - Active Message Handler Control Term #2007445
3 - Active RMS Timer Control Time 11:31:25
4 - Default Ruleset Allocation MON 31-OCT-1994
5 - Ruleset Maintenance
6 - Rule Maintenance
7 - Event Simulation
8 - Statistics Capture
9 - Message Action Control
X - Exit
F1=Help F2=Split F3=Exit F4=Return F9=Swap