nld and noft Manual

Contents

nld and noft Manual—520384-003

Examples (continued)

Example A-28. Effect of SET SCOPESOURCE on LISTOPTIMIZE Option A-21

Example A-29. Effect of SET SCOPESOURCE on XREFPROC Option A-21

Example A-30. Effect of RESET SCOPESOURCE on XREFPROC Option A-22

Example A-31. XREFPROC Option (Loadfile) A-23

Example A-32. DUMPPROC Option A-24

Example A-33. Effect of SET FORMAT INNERLIST on DUMPPROC Option A-25

Example A-34. LISTSRLFIXUP Option A-26

Example A-35. LISTSRLEXPORTS Option A-27

Example A-36. LISTSRLFIXUP (LLF) Option A-27

Tables

Table 2-1. Using the Guardian nld Utility to Link SRLs 2-17

Table 2-2. Using the OSS nld Utility to Link SRLs 2-19

Table 2-3. Floating-Point Consistency Check by nld Utility

(floattype Not Specified) 2-23

Table 2-4. Floating-Point Type Consistency Check by nld

(floattype Specified) 2-24

Table 2-5. Incompatible Program File and User Library floattypes (TNS) 2-25

Table 2-6. Local and Shared Symbols by Language 2-30

Table 2-7. Declarations and Definitions by Language 2-31

Table 3-1. nld Flag Summary 3-1

Table 3-2. Descriptions of Run-Time Attributes 3-13

Table 3-3. Default Run-Time Attribute Values 3-15

Table 4-1. noft Listing Options 4-4

Table 4-2. noft Dumping Options 4-5

Table 4-3. noft Control Options 4-5

Table 5-1. noft Flag Summary 5-1

Table 7-1. Unnecessary Information in Loadfiles 7-1

Table 8-1. Loadfile Segments and Sections 8-1

Table 8-2. MDEBUG Section Tables 8-2

Table 9-1. Corresponding Binder Tasks and Native Utilities 9-1

Table 9-2. Comparing Binder Commands to nld Options 9-3

Table 9-3. Comparing Binder with noft 9-6

Table 10-1. Comparison of nld Diagnostic Types 10-1

Table 10-2. Warning and Informational Message Defaults 10-1