nld and noft Manual

nld Diagnostic Messages

nld and noft Manual—520384-003

10-30

Fatal Errors

This is an internal error. Please contact your service provider.

See:

•

Running the nld Utility in the Guardian Environment on page 2-1

•

Running the nld Utility in the OSS Environment on page 2-3

**** ERROR **** [1105]:

You specified both the -prev and the -d_max_size flags, but

the value that you specified in the -d_max_size flag is

different from that found in the previous version of the SRL.

**** ERROR **** [1106]:

You specified both the -prev and the -t_max_size flags, but

the value that you specified in the -t_max_size flag is

different from that found in the previous version of the SRL.

**** ERROR **** [1107]:

You specified both the -prev and the -ev_max_size flags, but

the value that you specified in the -ev_max_size flag is

different from that found in the previous version of the SRL.

**** ERROR **** [1108]:

No input object file names were specified in the command

stream; if you just give the command 'nld', with no flags,

you will get a summary of the valid command syntax.

**** ERROR **** [1109]:

Incorrect format for a hexadecimal number; saw the string

'string' string.

**** ERROR **** [1110]:

The same SRL name, 'name', was found in SRL's with two

different filenames, 'filename-1' and 'filename-2'.