noft Manual (G06.27+, H06.03+, J06.03+)

noft Diagnostic Messages
noft Manual—528273-003
4-10
Data Errors
1023
Cause. Stated in message.
Recovery. Reenter LISTOPTIMIZE, specifying one or more procedures (for more
information, see LISTOPTIMIZE or LO on page 3-29).
1024
Cause. The object code file does not have complete symbols information.
Recovery. Rebuild the object code file with complete symbols information.
1025
Cause. The object code file has been stripped of all symbol tables.
Recovery. Rebuild the object code file with complete symbols information.
1026
Cause. Either:
•
The first few bytes of the object code file are corrupt.
•
The object code file is not an TNS/R ELF file.
Recovery. Rebuild the object code file using TNS/R compilers.
1028
Cause. The object code file is partially stripped of its symbols information.
*** DATA ERROR *** [1023]:
No procedures selected to look at, command aborted.
*** DATA ERROR *** [1024]:
No source file information available, command ignored.
*** DATA ERROR *** [1025]:
No symbol table available.
*** DATA ERROR *** [1026]:
This object is not a TNS/R ELF file. Use ENOFT for TNS/E
Object files.
*** DATA ERROR *** [1028]:
Object file has been at least partially stripped, unable to
continue.