noft Manual (G06.27+, H06.03+, J06.03+)

noft Diagnostic Messages
noft Manual—528273-003
4-14
Data Errors
Recovery. Give the object code file being examined and the series of commands that
you used to your service provider for analysis.
1042
Cause. noft could not find the opcode for the last address.
Recovery. Verify that the ICODE is dumped into a code section.
1043
Cause. An internal table is corrupt.
Recovery. Restart noft and reenter the command.
1044
Cause. Either the directory (pathname) specified in CD on page 3-5 is not present or
the subvolume-name specified in the SYSTEM or VOLUME on page 3-52 is not
present.
Recovery. Verify that the specified directory or subvolume exists. Restart noft to
return to the default directory or subvolume.
1045
Cause. noft cannot find a procedure in the object code file.
Recovery. Check the list of procedures to see if the procedure is in the object code
file. If not, rebuild the object code file.
*** DATA ERROR *** [1042]:
Unable to determine instruction.
*** DATA ERROR *** [1043]:
Unable to dump some unresolved items.
*** DATA ERROR *** [1044]:
Unable to locate current [directory|subvolume].
*** DATA ERROR *** [1045]:
Unable to find procedure in object file.