noft Manual (G06.27+, H06.03+, J06.03+)

noft Diagnostic Messages
noft Manual—528273-003
4-17
Data Errors
1055
Cause. LISTUNREFERENCED or LUR on page 3-35 was limited by either SET
SCOPEPROC or SET SCOPESOURCE. The number of items found in the scope was
zero.
Recovery. Either use RESET on page 3-44 to reset the scope to its default or use
SET on page 3-47 to change the scope. To see the current scope, use SHOW on
page 3-52.
1056
Cause. LISTUNREFERENCED or LUR on page 3-35 was limited by either SET
SCOPEPROC or SET SCOPESOURCE. An error occurred while attempting to display the
information.
Recovery. Use RESET on page 3-44 to reset the scope to its default.
1057
Cause. LISTSRLEXPORTS or LLE on page 3-33 was limited by either SET
SCOPEPROC or SET SCOPESOURCE. An error occurred while attempting to display the
information.
Recovery. Use RESET on page 3-44 to reset the scope to its default.
1058
Cause. LISTPROC or LP on page 3-30 was limited by either SET SCOPEPROC or SET
SCOPESOURCE. No matching information was found.
Recovery. Either use RESET on page 3-44 to reset the scope to its default or use
SET on page 3-47 to change the scope. To see the current scope, use SHOW on
page 3-52.
*** DATA ERROR *** [1055]:
Did not find any unreferenced symbols matching scope.
*** DATA ERROR *** [1056]:
Unable to dump some unreferenced item.
*** DATA ERROR *** [1057]:
Unable to dump srl fixup item.
*** DATA ERROR *** [1058]:
Did not find any procedures matching scope.