noft Manual (G06.27+, H06.03+, J06.03+)

noft Diagnostic Messages
noft Manual—528273-003
4-35
Syntax Errors
3047
Cause. The command number was in range, but the line was unavailable.
Recovery. Use HISTORY or H on page 3-22 to see if the command can be seen and,
if so, reenter the command.
3048
Cause. The number is out of the history buffer range.
Recovery. Use the SET HISTORYBUFFER command to set the size of the history
buffer (for more information, see SET on page 3-47).
3049
Cause. The string was not found at the beginning of any lines in the current history
buffer.
Recovery. Verify that the command is still in the current history buffer. Use the SET
HISTORYBUFFER command to set the size of the history buffer (for more information,
see SET on page 3-47).
3050
Cause. LISTPROC or LISTOPTIMIZE was unable to find a specified symbol.
Recovery. Use LISTPROC * or LISTOPTIMIZE * to see which symbols are
available (for more information, see LISTPROC or LP on page 3-30 and
LISTOPTIMIZE or LO on page 3-29).
*** SYNTAX ERROR *** [3047]:
Unable to find in-range line number in history.
*** SYNTAX ERROR *** [3048]:
Unable to find line number in history.
*** SYNTAX ERROR *** [3049]:
Unable to find string string in history.
*** SYNTAX ERROR *** [3050]:
Unable to find symbol in object file.