m 6.0+)

dba/m Database Manager installation and Operations Manual 522633-004 2-3

>> RSCCOM $ZRSC

(( ADD NETNAME DBAC

(( START NETNAME DBAC

(( STATUS NETNAME DBAC

The status of the service and port will be displayed.

The port must be in the RUNNING State.

If the RSC process name is not $ZRSC, ask the system administrator for the correct

process name.

• NonStop Software for Client-Server Connection Using RSC and Asynchronous

Option: Verify that the client-connection methods are correct. Required software

components are:

♦ NonStop asynchronous access method

To add asynchronous ports to the RSC, start the RSCCOM utility from a TACL prompt.

For example to add service name DBAMA,

>> RSCCOM $ZRSC

(( ADD asyncport DBAMA

(( ALTER asyncport DBAMA LINENAME $ASY03.#A

(( START asyncport DBAMA

(( STATUS asyncport DBAMA

The status of the service and port will be displayed.

The port must be in the RUNNING State.

If the RSC process name is not $ZRSC, ask the system administrator for the correct

process name.

• NonStop Software for Client-Server Connection Using RSC and TCP/IP Option:

Verify that the client-connection methods are correct. Required software components

are correct. Required software components are:

♦ NonStop TCP/IP IPMAA0 or higher

♦ TCP/IP utilities

An entry must exist in the SERVICES file for associating the Service Name and a

TCP/IP port used for connecting the workstation to Himalaya System.

This file is normally located in $SYSTEM.ZTCPIP.SERVICES. If the SERVICES

file is not located in $SYSTEM.ZTCPIP, ask the system administrator for the location

of the file or ask the administrator to add a service name.

The entry in the SERVICES files should like