m 6.0+)

2-6

Perform the installation as follows. You can cancel the installation at any time by

pressing any function key.

1. Execute the dba/m Database Manager installation macro:

INSTALL

2. The installation macro plays the prompts shown in Table 2-1. Explanations of the

prompts and sample responses are provided.

Type a response or press carriage return <cr> to accept the default value shown in the

prompt. To cancel the installation at any time, press any function key.

3. After you have answered all of the prompts listed in Table 2-1, the installation

macro displays the parameters and asks you to confirm that the displayed values

are correct.

• If any of the parameters are incorrect, select No. The installation macro displays

the prompts shown in Table 2-1 again.

• If all of the parameters are correct, select Yes. The installation macro displays the

prompts shown in Table 2-2.