NonStop JMS User's Manual (H06.03+, J06.03+, NonStop JMS 3.0+)

NSJMS Installation and Configuration for TNS/R
NonStop Server for Java Message Service User’s Manual—522356-006
2-4
Unpax the NSJMS Product Files
8. On the Host File Placement screen you can either accept the default disk locations
or browse to locations of your choice. Click Next when you are satisfied with the
locations.
9. On the Placement Manifest screen review the file locations. You can click Back to
go back and change the file locations. When you are satisfied with the locations,
click Next. This step can take a few minutes to complete.
10. On the Placement Complete screen you can choose to view the release
documentation or to launch DSM/SCM. You should review the release
documentation.
11. After you review the release documentation, click Finish to complete running
IPSetup.
Unpax the NSJMS Product Files
Select one of these processes to unpax the NSJMS product files.
If you will be using DSM/SCM:

Use DSM/SCM to Place the Product Files in /usr/tandem on page 2-4

Use DSM/SCM and PINSTALL to Place the Product Files in a User-Specified
Installation Directory on page 2-5
If you will not be using DSM/SCM

Use COPYOSS to Place the Product Files in /usr/tandem on page 2-6
Use DSM/SCM to Place the Product Files in /usr/tandem
If you use DSM/SCM, this process will unpax the NSJMS PAX file, T1251PAX, in the
standard OSS location, that is, in /usr/tandem. For additional information about
using DSM/SCM, see the DSM/SCM User’s Guide.
1. RECEIVE the product files from disk (DSV locations) or tape.
2. Check the Manage OSS Files option for the target configuration within the
DSM/SCM Planner Interface.
3. COPY the received product files to a new software revision of the configuration you
want to update.
4. BUILD and APPLY the configuration revision.
Note. You must be installing NSJMS on a NonStop S-series system running G06.18 or
later RVU.