NonStop JMS User's Manual (H06.03+, J06.03+, NonStop JMS 3.0+)

NSJMS Installation and Configuration for TNS/E
NonStop Server for Java Message Service User’s Manual—522356-006
3-2
Before You Begin the Installation
The following installation instructions are correct as of the time this manual was
published; however, the README.TXT file or Softdoc supersedes the information here.
Before You Begin the Installation

Check that you have downloaded and extracted FS Context Service
Provider on to your workstation from the Sun Microsystems’ JNDI web site
(http://java.sun.com/products/jndi/index.html).

Review the README file on the product CD to ensure you have the correct version
for all products installed on your NonStop NS-series system.

Check that your site meets the minimum hardware and software requirements for
the installation utility and also any product-specific installation requirements. (For
more information, see the README on the product CD.)

Review the USRGUIDE.PDF file in the NSK_SW subdirectory on the product CD.
This file contains the IPSetup User’s Guide that provides instructions for using
IPSetup, a utility that installs Independent Products.

Determine whether you will use DSM/SCM to move files to Installation Subvolumes
(ISVs) after files are placed on your workstation. For additional information about
using DSM/SCM, see the DSM/SCM User’s Guide.
Run the IPSetup Program
Use the IPSetup program to place the NSJMS components on your host NonStop
NS-series server. If TCP/IP and FTP are unavailable, or if you have problems with
automatic file placement, see the IPSetup User’s Guide (the USRGUIDE.PDF file in the
NSK_SW subdirectory on the product CD) for information about how to manually place
files on the NonStop system.
To Run IPSetup
Exit all other Windows applications before placing NSJMS software on the host
system.
1. Open the product CD by double clicking on the CD drive.
2. Click the View Readme file button. Setup opens the README file in Notepad. Be
sure to review the entire README file before proceeding.
Note. Using DSM/SCM is optional for G06.18 or later RVUs, but is recommended.
Caution. Every time you use the Install product to install a release of the operating system
software, you must reinstall your Independent Product. Installing a release using the Install
product can result in overwriting this Independent Product with older versions of software. This
problem does not occur if you are using DSM/SCM to install releases.