NonStop JMS User's Manual (H06.03+, J06.03+, NonStop JMS 3.0+)

NSJMS Installation and Configuration for TNS/E
NonStop Server for Java Message Service User’s Manual—522356-006
3-4
Unpax the NSJMS Product Files
Use DSM/SCM to Place the Product Files in /usr/tandem
If you use DSM/SCM, this process will unpax the NSJMS PAX file, T1251PAX, in the
standard OSS location, that is, in /usr/tandem. For additional information about
using DSM/SCM, see the DSM/SCM User’s Guide.
1. RECEIVE the product files from disk (DSV locations) or tape.
2. Check the Manage OSS Files option for the target configuration within the
DSM/SCM Planner Interface.
3. COPY the received product files to a new revision of the software configuration you
want to update.
4. BUILD and APPLY the configuration revision.
5. Run ZPHIRNM to perform the RENAME step.
6. Go to Install and Configure NSJMS on page 3-6 for detailed instructions about
running the install script and configuring NSJMS.
Use DSM/SCM and PINSTALL to Place the Product Files in a
User-Specified Installation Directory
If you use DSM/SCM and PINSTALL, this process will unpax the NSJMS PAX file,
T1251PAX, in a user-specified installation directory. For additional information about
using DSM/SCM, see the DSM/SCM User’s Guide. For additional information about
using PINSTALL, see the Open System Services Management and Operations Guide.
1. RECEIVE the product files from disk (DSV locations) or tape.
2. Uncheck the Manage OSS Files option for the target configuration within the
DSM/SCM Planner Interface.
3. COPY the received product files to a new revision of the software configuration you
want to update.
4. BUILD and APPLY the configuration revision.
Note. You must be installing NSJMS on a NonStop NS-series system running H06.03 or
later RVU. For U64 support you must be installing NSJMS on a NonStop NS-series system
running H06.25 or later RVU.
Note. If the option Manage OSS Files was not selected in the DSM/SCM planner interface
in Step 2
above, the NSJMS PAX file is in the Guardian subvolume $ISV.ZOSSUTL (where
ISV is the name of your installation subvolume). Use COPYOSS to extract and place the
contents of the NSJMS PAX file into the OSS file system. (Go to Use COPYOSS to Place the
Product Files in /usr/tandem on page 3-5).
Note. You must be installing NSJMS on a NonStop NS-series system running H06.25 or
later RVU.