NonStop JMS User's Manual (H06.03+, J06.03+, NonStop JMS 3.0+)

Reliable Messaging Bridge
NonStop Server for Java Message Service User’s Manual—522356-006
5-16
Using the Configuration Tool
Example
An example of using the configuration tool to delete the bridge named sampl.qtoq is
shown below. Bold text indicates user input.
Request Information about a Bridge
The info bridge command returns bridge Pathway configuration information.
Info Bridge Command Prompts
The info bridge command steps through these command prompts. At each prompt,
enter the appropriate value or press Enter to proceed to the next prompt. Pressing
Enter without entering a new value will select the value, if any, which appears in
brackets ([ ]) at each prompt. For example, Pathway Server Class Name
[qtoq]:
NSJMS Messaging Bridge Configuration Tool
Copyright 2003 Hewlett Packard Development Company, L.P.
command: delete bridge
Pathmon Process Name [sampl]:
Pathway Server Class Name [qtoq]:
Delete sampl.qtoq [N]: y
Generating start_sampl script
Generating sampl.properties
Generating stop_sampl script
Bridge deleted
Prompt Usage
Pathmon Process
Name:
To obtain configuration information about a specific bridge,
enter the Pathmon Process Name and the Pathway Server
Class Name.
To obtain configuration information for all configured bridges
running under a specific Pathmon Process, enter the Pathmon
Process Name and the wildcard character (*) for the Pathway
Server Class Name.
To obtain configuration information for all configured bridges,
enter the wildcard character (*) for the Pathmon Process
Name.
Pathway Server Class
Name:
See above usage instructions.