NonStop Operating System Event Management Programming Manual

SCSI Module Driver Event Messages (ZSMD)
HP NonStop Operating System Event Management Programming Manual—520372-020
20-43
Messages
Unconditional Tokens
Cause. A controller problem has occurred.
Effect. None. This might be an indication of some other problem.
Recovery. This is an informational message only; no corrective action is needed.
312: ZSMD-EVT-CTLR-EXCESS-INTR
The controller caused too many interrupts.
Unconditional Tokens
Cause. A controller problem has occurred.
Effect. The path from the processor to the devices attached to the controller is lost.
Recovery. Check the controller hardware.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZSMD-EVT-
CTLR-INTR-ERR (311).
ZEMS-TKN-LDEV Subject token that contains the logical device number of the
affected disk drive.
Subject: ZEMS-TKN-LDEV
Potentially critical event: Yes
Action event: Yes
Message sender: DP2 Driver
TMDS collector: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-LDEV token-type ZSPI-TYP-UINT
Event-Message Text
SCSI Controller Excess Interrupts
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZSMD-EVT-
CTLR-EXCESS-INTR (312).
ZEMS-TKN-LDEV Subject token that contains the logical device number of the
affected disk drive.