NonStop Operating System Event Management Programming Manual

DBIOPROC Event Messages (ZDIO)
HP NonStop Operating System Event Management Programming Manual—520372-020
21-8
Messages
2: ZDIO-EVT-HW-XSUM-SW-FIXED
A checksum error detected using hardware checksumming did not recur when the
checksumming operation was repeated using software.
Unconditional Tokens
Conditional Token
Cause. The S7000 checksumming hardware implementation can produce an incorrect
checksum under certain rare conditions. An extra check is made to detect this case.
Effect. None.
Subject: ZEMS-TKN-XLDEVNAME and ZEMS-TKN-LDEVNUMBER
Potentially critical event: No
Action event: No
Message sender: DBIOPROC
TMDS collector: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-ENUM
ZEMS-TKN-LDEVNUMBER token-type ZSPI-TYP-INT2
ZDIO-TKN-INTERNAL-CALLER token-type ZSPI-TYP-INT
Conditional Token
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
Event-Message Text
HW checksum error fixed by SW.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDIO-EVT-HW-
XSUM-SW-FIXED (2).
ZEMS-TKN-LDEVNUMBER Subject token that specifies the logical device number
associated with the relevant I/O process.
ZDIO-TKN-INTERNAL-CALLER Internal caller code that identifies to development where
in the subsystem the event was initiated.
Token Description
ZEMS-TKN-XLDEVNAME Primary subject token that specifies the logical device
name associated with the relevant I/O process.