NonStop Operating System Event Management Programming Manual

Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual—520372-020
23-3
1021: ZSTO-EVT-ADD The storage subsystem manager defined
an object in the storage subsystem and
added the object to the system
configuration database.
1022: ZSTO-EVT-DELETE
The storage subsystem manager has
removed an object from the system
configuration database.
1023: ZSTO-EVT-ERROR-IN-SIFM
The storage subsystem manager
received an error when communicating
with the SIFM.
1024: ZSTO-EVT-DEVICE-ALTER-STOP
The storage subsystem manager reports
an implicit device termination caused by
an ALTER command.
1025: ZSTO-EVT-ZCNF-ACCESS-ERROR
The storage subsystem manager failed
to access the configuration utility process
($ZCNF).
1026: ZSTO-EVT-ADAPTER-AUTO-FAIL
The storage subsystem manager failed
to autoconfigure an adapter.
1027: ZSTO-EVT-ADAPTER-AUTO-RETRY
The storage subsystem manager is
waiting for a resource that is blocking
autoconfiguration of an adapter.
1028: ZSTO-EVT-CRU-INSERTED
The storage subsystem manager
received a hardware insertion event from
the configuration utility process ($ZCNF).
1029: ZSTO-EVT-CRU-REMOVED
The storage subsystem manager
received a hardware deletion event
caused by the $ZCNF.
1030: ZSTO-EVT-WRONG-CRU-INSERTED
The storage subsystem manager
detected that the hardware insertion
event received does not match the
configuration information in the system
configuration database.
1031: ZSTO-EVT-CRU-CONFIGURED
The storage subsystem manager
successfully added a customer-
replaceable unit (CRU) configuration to
the system configuration database.
1032: ZSTO-EVT-CRU-INIT
The storage subsystem manager has
successfully initialized a CRU.
Table 23-1. Storage Subsystem Event Messages (page3of7)
Event Number and Symbolic Name Description