NonStop Operating System Event Management Programming Manual
Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual—520372-020
23-6
2002: ZSTO-EVT-CNFG-DISK-CACHE The storage subsystem manager
generates an audit event when a disk
configuration changes and cache
settings have been altered.
2003: ZSTO-EVT-CNFG-DISK-REVIVE
The storage subsystem manager
generates an audit event when a disk
changes configuration. Revive settings
are altered and reported.
2004: ZSTO-EVT-CNFG-CRU-NOT-CONFIG
The storage subsystem manager has
detected that a CRU is not configured.
This event is generated during system
load or when a hardware insertion event
is received. The event occurs only when
automatic storage configuration is
disabled.
2005: ZSTO-EVT-CNFG-MISSING-CRU
The storage subsystem manager has
detected that a configured CRU is not
present in the system.
2006: ZSTO-EVT-CNFG-SAC-MATCH-FAILED
The storage subsystem manager
reports that the SAC type does not
match the devices already
configured on that SAC.
2500: ZSTO-EVT-RECONCILE-SMF The storage subsystem manager reports
that an object exists in SMF catalogs but
not in the system configuration database.
2501: ZSTO-EVT-RECONCILE-CONFIG
The storage subsystem manager reports
that an object exists in the system
configuration database but not in the
SMF catalogs.
2502: ZSTO-EVT-SMF-LAUNCH-FAILURE
The storage subsystem manager reports
that a pool launch failed.
2503: ZSTO-EVT-XIOCOLORADOPKTCONFIG
The storage subsystem manager reports
a failure to configure a ServerNet device
adapter (ServerNet/DA).
2504: ZSTO-EVT-SMF-INCONSISTENCY
The storage subsystem manager reports
that a user command has created an
inconsistency between the system
configuration database and SMF
catalogs.
2505: ZSTO-EVT-SMF-LAUNCH-DELAY
The storage subsystem manager reports
that an attempt to start the SMF Monitor
Process ($ZSMS) has been delayed or
aborted.
Table 23-1. Storage Subsystem Event Messages (page6of7)
Event Number and Symbolic Name Description