NonStop Operating System Event Management Programming Manual

Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual—520372-020
23-24
Description of ZSTO Event Messages
Description of ZSTO Event Messages
The storage subsystem event messages are described in detail on the following pages.
The descriptions are in ascending order by event number. The symbolic name for the
event number is ZSTO-EVT-name, where name describes the event that generated
the message.
Topics:

Information in Event Description Messages on page 23-24

Recovery Action Requiring Vendor Support on page 23-25

Descriptions of individual event messages (for a linked list, see Table 23-1 on
page 23-1)
Information in Event Description Messages
Each description contains the following information:

A header showing the numeric value and symbolic name for the event number.

A paragraph describing the event message.

A list:

Identifying the subject of the event message.

Indicating whether the event is channel-related, device-related, or controller-
related.

Indicating whether the message identifies a potentially critical event (whether
ZEMS-TKN-EMPHASIS has the value ZSPI-VAL-TRUE).

Indicating whether the message identifies an action-attention event (whether
ZEMS-TKN-ACTION-NEEDED has the value ZSPI-VAL-TRUE).
ZSTO-TKN-LOCKINFO-STR<n >,
where n =1.3
Informational string.
ZSTO-TKN-LOCKINFO-VAL<n >,
where n =1.2
Informational value.
ZSTO-TKN-SLM-PRIMARY Flag indicating a primary or backup process.
ZSTO-TKN-OBJECT-TYPE Name of the object type.
ZSTO-TKN-COMMAND SCF command.
ZSTO-TKN-ATTRIBUTE. SCF attribute
Note. Each event message also contains the header tokens listed in Section 2, Header and
Common Tokens, and the tokens listed in the Common Definitions on page 3-5.
Token Description (page 3 of 3)