NonStop Operating System Event Management Programming Manual

Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual—520372-020
23-82
Messages
Unconditional Tokens
Conditional Tokens
Cause. The storage subsystem manager failed to autoconfigure a CRU. The event
contains information describing the reason for the failure.
Effect. The CRU is not configured.
Recovery. Correct the error described in the message and try again.
Conditional Tokens
ZSTO-TKN-REASON token-type ZSTO-TYP-CONF-ERROR
ZSTO-TKN-REASONTEXT token-type ZSPI-TYP-STRING
ZSTO-TKN-RETCODE token-type ZSPI-TYP-INT2
ZSTO-TKN-ERRORCODE token-type ZSPI-TYP-INT2
Event-Message Text
Failed to configure object-type device-name for
location (group, module, slot)
[. Reason: reason [(reason-text)]]
[, Error code: error-code]
[, Error detail: error-detail].
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZSTO-EVT-
CRU-CONFIG-FAILED (1045).
ZEMS-TKN-XLDEVNAME Either this token or ZSTO-TKN-CRU-TYPE is the
subject token.
ZEMS-TKN-XLDEVNAME Subject token that contains the device name.
ZSTO-TKN-CRU-TYPE Token that contains the CRU type.
ZCOM-TKN-OBJTYPE Object type.
ZEMS-MAP-PHYSICAL-ADDRESS Physical location of the CRU.
Token Description
ZSTO-TKN-REASON Optional token specifying the reason for a configuration.
ZSTO-TKN-REASONTEXT Optional token containing the text of the reason for the
error.
ZSTO-TKN-RETCODE Optional token containing the type of error.
ZSTO-TKN-ERRORCODE Optional token containing the error detail.