NonStop Operating System Event Management Programming Manual

Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual—520372-020
23-94
Messages
Cause. A command that you tried to send to the I/O process failed.
Effect. The command is not executed. SCF waits for the next command.
Recovery. Collect the information in the error text and contact your service
representative for further assistance. See the SCF Reference Manual for the Storage
Subsystem.
1057: ZSTO-EVT-POWER-ACTION
The storage subsystem manager turned the power to a device on or off.
Unconditional Tokens
Cause. The user issued a SCF CONTROL DISK, POWER command.
Effect. The power was turned either on or off.
ZSTO-TKN-SYNDROMECLASS Syndrome class.
ZSTO-TKN-SYNDROMEVALUE Syndrome value.
Subject: ZEMS-TKN-XLDEVNAME
Potentially critical event: No
Action event: No
Message sender: Storage subsystem manager process ($ZZSTO)
TMDS collector: Yes
Unconditional Tokens
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZSTO-TKN-POWER-VALUE token-type ZSTO-TYP-ENM-POWER-VALUE
ZSTO-TKN-TERMINALPROCESS token-type ZSPI-TYP-STRING
ZSTO-TKN-PROC-DESC token-type ZSPI-TYP-STRING
ZSTO-TKN-USERID token-type ZSPI-TYP-USERID
Event-Message Text
Power { on | off } command executed {at terminal terminal |
by process process } by user user-id
Token Description
ZEMS-TKN-XLDEVNAME Subject token that contains the device name.
ZSTO-TKN-POWER-VALUE ON or OFF.
ZSTO-TKN-TERMINALPROCESS If this token is not present, token ZSTO-TKN-PROC-
DESC must be present.
ZSTO-TKN-PROC-DESC Process descriptor.
ZSTO-TKN-USERID User ID.
Token Description (page 2 of 2)