NonStop Operating System Event Management Programming Manual

Storage Subsystem Event Messages (ZSTO)
HP NonStop Operating System Event Management Programming Manual520372-020
23-107
Messages
achieved. For “Disk process not running” and “SMF configured CPU not running,” the
storage subsystem manager aborts the task.
Recovery. Check the reason text returned and take the appropriate corrective action
as follows:
If TMF is not running, start TMF. If TMF is already started, verify whether TMF is
ready for transactions. For information on starting TMF or checking or enabling
transactions on TMF, see the TMF Reference Manual.
If the physical volume specified for the CATALOGLOCATION volume of the SMF
Monitor Process is not in the STARTED summary state, use the SCF START DISK
command to bring the disk paths up. If the CATALOGLOCATION volume is not
audited, enable it for auditing by TMF.
If the disk process of the CATALOGLOCATION volume of the SMF Monitor
Process is not running, use the SCF START DISK command to start the disk, and
then use SCF START MON command to start the SMF Monitor Process.
If both the primary and backup CPUs configured for the SMF Monitor Process are
not running, reload one or both of the configured processors. During the next CPU
reload, the storage subsystem manager makes another attempt to start the SMF
Monitor Process.
3000: ZSTO-EVT-LOCK-TIMEOUT
The SLM detected that a lock owner did not release the lock within the specified time.
When the specified time expires, the lock manager checks if the owner is “alive.” If it is
“alive,” this event is generated.
Note. After the two corrective actions above are resolved, the Storage Subsystem
Manager restarts the SMF Monitor Process automatically.
Subject: ZEMS-TKN-XLDEVNAME
Potentially critical event: Yes
Action event: No
Message sender: SLM
TMDS collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-XLDEVNAME token-type ZSPI-TYP-STRING
ZSTO-TKN-RESOURCE-TYPE token-type ZSPI-TYP-STRING
ZSTO-TKN-RESOURCE-NAME token-type ZSPI-TYP-INT2
ZSTO-TKN-SLM-PRIMARY token-type ZSPI-TYP-STRING
ZSTO-TKN-PROC-NAME token-type ZSPI-TYP-STRING