NonStop Operating System Event Management Programming Manual

HP NonStop Operating System Event Management Programming Manual—520372-020
24-1
24 Configuration Services Event
Messages (ZDSC)
ZDSC event messages are reported to EMS by:

$ZCNF process

$ZCDB process

$ZPM process

$ZHOME process
Table 24-1. ZDSC Event Messages (page1of4)
Event Number and Symbolic Name Description
1024: ZDSC-EVT-ZPM-STARTUP-FAILURE
The persistence manager process
($ZPM) could not be launched.
1025: ZDSC-EVT-ZPM-PROCESS-STOPPED
The persistence manager process
($ZPM) was stopped unexpectedly.
1026: ZDSC-EVT-ZPM-RESTART-THRES
The persistence manager process
($ZPM) restart threshold was
exceeded.
1027: ZDSC-EVT-ZPM-RESTARTING
The persistence manager process
($ZPM) is attempting to restart.
1029: ZDSC-EVT-UNKNOWN-CRU-DELETION
A Customer Replaceable Unit (CRU)
that was not known in the hardware
configuration tables was removed from
the system.
1030: ZDSC-EVT-CANNOT-ADD-CRU
The inserted Customer Replaceable
Unit (CRU) information cannot be
added to the hardware configuration
tables.
1031: ZDSC-EVT-BAD-MAINTENANCE-EVENT
Inconsistent or bad event data was
received from the service processor.
1032: ZDSC-EVT-UNXPCTD-CRU-CNF
An unexpected Customer Replaceable
Unit (CRU) configured event was
received for an unknown CRU.
1033: ZDSC-EVT-UNXPCTD-CRU-SNET-CNF
An unexpected Customer Replaceable
Unit (CRU) ServerNet configured event
was received for an unknown CRU.
1034: ZDSC-EVT-BAD-SEQ-NUMBER
A service processor hardware event
sequence number that is out of
synchronization was received.
1035: ZDSC-EVT-USING-BACKUP-CONFIG
The previously saved configuration file
was copied and is now in use as the
system’s configuration database.