NonStop Operating System Event Management Programming Manual

Configuration Services Event Messages (ZDSC)
HP NonStop Operating System Event Management Programming Manual—520372-020
24-24
Messages
Cause. An SCF SAVE CONFIGURATION command was used or the CONFIG file
was saved to CONFSAVE by $ZCDB during its processing. $ZCDB always saves the
current configuration file into CONFSAVE when the system is loaded.
Effect. The current configuration has been saved into either CONFnnnn or
CONFSAVE.
Recovery. This is an informational message only; no corrective action is needed.
1039: ZDSC-EVT-CANNOT-READ-CONFIG
An error occurred while reading the system configuration database.
Unconditional Tokens
Potentially critical event: No
Action event: No
Message sender: $ZCDB
TMDS collector: No
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZDSC-TKN-FILE-ERROR token-type ZSPI-TYP-UINT
ZDSC-TKN-SUBSYSTEM-NUMBER token-type ZSPI-TYP-INT2
ZDSC-TKN-RECORD-TYPE token-type ZSPI-TYP-INT2
ZDSC-TKN-RECORD-NAME token-type ZSPI-TYP-STRING
Event-Message Text
There has been an error reading the system configuration
database.
File error: file-error
Key= Subsystem number: subsystem-number, record type: record-
type, rname: record-name
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZDSC-
EVT-CANNOT-READ-CONFIG (1039).
ZDSC-TKN-FILE-ERROR Type of file error that occurred. Value is ZDSC-TNM-
FILE-ERROR.
ZDSC-TKN-SUBSYSTEM-NUMBER Subsystem that could not be read. Value is ZDSC-
TNM-SUBSYSTEM-ERROR.
ZDSC-TKN-RECORD-TYPE Type of record. Value is ZDSC-TNM-RECORD-
TYPE.
ZDSC-TKN-RECORD-NAME Name of the record. Value is ZDSC-TNM-RECORD-
NAME.