NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-3
129: ZCMP-EVT-MEMCOPY-ERROR Memory copy operation could not be
started.
130: ZCMP-EVT-PE-IN-ERROR
A PE reported an internal error.
132: ZCMP-EVT-PE-REINT-START-ERROR
A PE reintegration could not start.
133: ZCMP-EVT-PE-QUIESCE-TO
An attempt to make a PE quiescent in
preparation for reintegration timed out.
134: ZCMP-EVT-PE-REINT-START-TO
A PE reintegration timed out.
200: ZCMP-EVT-ECHO-STATUS
FPGA 3 logic detected a state change.
201: ZCMP-EVT-COMPLEX-INVALID-1
A NonStop Blade Complex is invalid
because PEs with the same NonStop
Blade Element tracking ID have different
NonStop Blade Element IDs.
202: ZCMP-EVT-COMPLEX-INVALID-2
A NonStop Blade Complex is invalid
because PEs with the same NonStop
Blade Element tracking ID have different
node names and node numbers.
203: ZCMP-EVT-COMPLEX-INVALID-3
A NonStop Blade Complex is invalid
because its CPUs have different NonStop
Blade Elements.
204: ZCMP-EVT-COMPLEX-INVALID-4
A NonStop Blade Complex is invalid
because its NonStop Blade Elements have
different numbers of PEs.
205: ZCMP-EVT-COMPLEX-INVALID-5
A NonStop Blade Complex is invalid
because a processor reported unexpected
NonStop Blade Element tracking IDs.
206: ZCMP-EVT-COMPLEX-NOW-INVALID
* A valid NonStop Blade Complex became
invalid.
207: ZCMP-EVT-COMPLEX-NOW-VALID
An invalid complex became valid.
208: ZCMP-EVT-ECHO-CABLING-ERR-1
* Incoming reintegration cables come from
different NonStop Blade Elements.
209: ZCMP-EVT-ECHO-CABLING-ERR-2
Incoming reintegration cables come from
different NonStop Blade Complexes.
210: ZCMP-EVT-ECHO-CABLING-ERR-3
Incoming reintegration cables come from
different sides of the same NonStop Blade
Element.
211: ZCMP-EVT-ECHO-CABLING-ERR-4
Reintegration cables do not form a ring.
212: ZCMP-EVT-ECHO-CABLING-ERR-5
Reintegration cable ring excludes a
NonStop Blade Element.
213: ZCMP-EVT-ECHO-CABLING-INVALID
* A valid reintegration cabling configuration
became invalid.
Table 25-2. ZCMP Event Messages (page 3 of 5)
* Both $ZLOG and $0 report this event to the EMS.