NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-26
Messages
Unconditional Tokens
Token Interpretations
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 1 <20>
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 2 <25>
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 3 <30>
Event-Message Text
Slice reset has failed
Slice ID : <1>
Slice module tracking ID : <2>
Reset failure reason : <3>
Reset retry count : <4>
Affected CPUs :
CPU <11>, LID <12>
<*IF 20 > CPU <21>, LID <22><*ENDIF>
<*IF 25 > CPU <26>, LID <27><*ENDIF>
<*IF 30 > CPU <31>, LID <32><*ENDIF>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-
EVT-SLICE-RESET-FAILED (111).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop Blade
Element.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element.
ZCMP-TKN-RESET-FAIL-REASON Reason that reset failed (see Table 25-11
on
page 25-26).
ZCMP-TKN-RETRIES Number of tries to reset the NonStop Blade
Element (including this try).
ZCMP-TKN-SLICE-ARRAY.CPU(n ) Subject token that specifies the processor of PE
n +1 on the NonStop Blade Element.
ZCMP-TKN-SLICE-ARRAY.LID(n ) Subject token that specifies the LID of PE n +1
on the NonStop Blade Element.
ZCMP-TKN-SLICE-ARRAY.NUMLIDS Number of unique LIDs (PEs) that are running
the NonStop operating system on the NonStop
Blade Element.
Table 25-11. ZCMP-TKN-RESET-FAIL-REASON Values (page 1 of 2)
Value Meaning
ZCMP-ENM-RESETFAIL-ISOLATE NonStop Blade Element could not be isolated.
ZCMP-ENM-RESETFAIL-RESET NonStop Blade Element reset could not be
initiated.