NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-30
Messages
Unconditional Tokens
Cause. See Table 25-13.
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
114: ZCMP-EVT-SLICE-RESET-ENABLED
A NonStop Blade Element reset was enabled.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-
EVT-SLICE-RESET-DISABLED (113).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop Blade
Element.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element.
ZCMP-TKN-DISABLE-RESET-RSN Reason that reset was disabled (see
Table 25-13
on page 25-30).
ZCMP-TKN-RETRIES Number of tries to reset the NonStop Blade
Element (including this try).
ZCMP-TKN-SLICE-ARRAY.CPU(n ) Subject token that specifies the processor of PE
n +1 on the NonStop Blade Element.
ZCMP-TKN-SLICE-ARRAY.LID(n ) Subject token that specifies the LID of PE n +1
on the NonStop Blade Element.
ZCMP-TKN-SLICE-ARRAY.NUMLIDS Number of unique LIDs (PEs) that are running
the NonStop operating system on the NonStop
Blade Element.
Table 25-13. ZCMP-TKN-DISABLE-RESET-RSN Values
Value Meaning
ZCMP-ENM-DISABLE-RESET-API Disable-NonStop-Blade-Element-reset API.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: No