NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-31
Messages
Unconditional Tokens
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCMP-TKN-SLICEID <1> token-type ZSPI-TYP-BYTE
ZCPU-TKN-SLICE-TRACKING-ID <2> token-type ZSPI-TYP-STRING
ZCMP-TKN-ENABLE-RESET-RSN <3> token-type ZSPI-TYP-ENUM
ZCMP-TKN-SLICE-ARRAY.CPU(0) <11> token-type ZSPI-TYP-INT
ZCMP-TKN-SLICE-ARRAY.LID(0) <12> token-type ZSPI-TYP-BYTE
ZCMP-TKN-SLICE-ARRAY.CPU(1) <21> token-type ZSPI-TYP-INT
ZCMP-TKN-SLICE-ARRAY.LID(1) <22> token-type ZSPI-TYP-BYTE
ZCMP-TKN-SLICE-ARRAY.CPU(2) <26> token-type ZSPI-TYP-INT
ZCMP-TKN-SLICE-ARRAY.LID(2) <27> token-type ZSPI-TYP-BYTE
ZCMP-TKN-SLICE-ARRAY.CPU(3) <31> token-type ZSPI-TYP-INT
ZCMP-TKN-SLICE-ARRAY.LID(3) <32> token-type ZSPI-TYP-BYTE
Token Interpretations
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 1 <20>
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 2 <25>
ZCMP-TKN-SLICE-ARRAY.NUMLIDS > 3 <30>
Event-Message Text
Slice reset has been enabled
Slice ID : <1>
Slice module tracking ID : <2>
Reset enable reason : <3>
Affected CPUs :
CPU <11>, LID <12>
<*IF 20 > CPU <21>, LID <22><*ENDIF>
<*IF 25 > CPU <26>, LID <27><*ENDIF>
<*IF 30 > CPU <31>, LID <32><*ENDIF>
Token Description (page1of2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-
EVT-SLICE-RESET-ENABLED (114).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop Blade
Element.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element.
ZCMP-TKN-ENABLE-RESET-RSN Reason that reset was enabled (see
Table 25-14
).
ZCMP-TKN-RETRIES Number of tries to reset the NonStop Blade
Element (including this try).