NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-35
Messages
Cause. See Table 25-15.
Effect. None.
Recovery. If the problem persists, contact your service provider.
117: ZCMP-EVT-CANT-RESET
A NonStop Blade Element cannot be reset.
ZCPU-TKN-SLICE-TRACKING-ID1 If the value of ZCMP-TKN-CANT-REINT-
REASON is ZCMP-ENM-REINT-LOC-PE-
DOWN, the value of this token is the ID of the
NonStop Blade Element that is preventing
reintegration of the PE; otherwise, it is 255
(decimal).
Table 25-15. ZCMP-TKN-CANT-REINT-REASON Values
Value Meaning
ZCMP-ENM-REINT-CPU-HALT Reintegration would halt processor.
ZCMP-ENM-REINT-LOC-PE-DOWN PE not in state to be reintegrated.
ZCMP-ENM-REINT-ECHO-ERROR FPGA 3 logic error occurred.
ZCMP-ENM-REINTS-DISABLED Reintegrations are disabled.
ZCMP-ENM-REINT-NO-SOURCE Source PE for reintegrations is down.
ZCMP-ENM-REINT-PE-HSS PE in HSS - cannot be reintegrated.
ZCMP-ENM-REINT-PE-ACTIVE PE is running the NonStop operating system.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: No
Token Description (page2of2)