NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-38
Messages
Unconditional Tokens
Token Interpretation
ZCPU-TKN-LID <> %HFF
Event-Message Text
Operation aborted
Operation : <1>
Abort reason : <2>
Affected Slice Tracking ID : <3>
<*IF 10 > Affected CPU : <4>
Affected LID : <5> <*ENDIF>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-EVT-
OPERATION-ABORTED (118).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCMP-TKN-OP Operation that aborted (see Table 25-17
on
page 25-38).
ZCMP-TKN-ABORT-REASON Reason that the operation aborted (seeTable 25-18
on
page 25-39 ).
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element.
ZCPU-TKN-LID Subject token that specifies the LID of the affected PE
on the NonStop Blade Element.
ZCPU-TKN-CPU Subject token that specifies the processor where the
PE resides.
Table 25-17. ZCMP-TKN-OP Values
Value Operation
ZCMP-ENM-OP-REINT PE reintegration
ZCMP-ENM-OP-RESET NonStop Blade Element reset
ZCMP-ENM-OP-RELOAD Processor reload
ZCMP-ENM-OP-FW-UPDATE Firmware update
ZCMP-ENM-OP-FW-SCRUB Firmware scrub