NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-50
Messages
Unconditional Tokens
Cause. An error occurred while trying to initialize FPGA 3 hardware in preparation for
reintegrating a PE or resetting a NonStop Blade Element.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-EVT-
ECHO-INIT-ERROR (126).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop Blade
Element that was to be reset.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the source NonStop Blade Element.
ZCMP-TKN-ECHO-STATUS Status of the FPGA 3 device for the source NonStop
Blade Element (contents of the FPGA 3 status register,
which might provide FPGA 3 hardware error
information).
ZCMP-TKN-ECHO-ERROR Contents of the FPGA 3 error register for the source
NonStop Blade Element (contents of the FPGA 3
status register, which might provide FPGA 3 hardware
error information).
ZCMP-TKN-ECHO-INFO Additional FPGA 3 information returned for the source
NonStop Blade Element in hexadecimal (contents of
the echoAdditionalInfo field of the echoInfo structure).
ZCPU-TKN-SLICE-TRACKING-ID1 Tracking ID of the spectator NonStop Blade Element.
ZCMP-TKN-ECHO-STATUS1 Status of the FPGA 3 device for the spectator NonStop
Blade Element (contents of the FPGA 3 status register,
which might provide FPGA 3 hardware error
information).
ZCMP-TKN-ECHO-ERROR1 Contents of the FPGA 3 error register for the spectator
NonStop Blade Element (contents of the FPGA 3
status register, which might provide FPGA 3 hardware
error information).
ZCMP-TKN-ECHO-INFO1 Additional FPGA 3 information returned for the
spectator NonStop Blade Element in hexadecimal
(contents of the echoAdditionalInfo field of the
echoInfo structure).
ZCMP-TKN-ECHO-INIT-ERROR Result of the FPGA 3 initialization (see Table 25-24
).
Table 25-24. ZCMP-TKN-ECHO-INIT-ERROR Values
Value Meaning
ZCMP-ENM-ECHOINIT-HW FPGA 3 hardware error occurred.
ZCMP-ENM-ECHOINIT-I2C FPGA 3 hardware could not be accessed.
ZCMP-ENM-ECHOINIT-TO FPGA 3 hardware initialization time limit expired.