NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-55
Messages
Cause. Either:

A hardware problem with the FPGA 3 logic

Software internal errors
Effect. None.
Recovery. Contact your service provider.
ZCMP-TKN-ECHO-STATUS Status of the FPGA 3 device for the source NonStop
Blade Element (contents of the FPGA 3 status
register, which might provide FPGA 3 hardware error
information).
ZCMP-TKN-ECHO-ERROR Contents of the FPGA 3 error register for the source
NonStop Blade Element (contents of the FPGA 3
status register, which might provide FPGA 3 hardware
error information).
ZCPU-TKN-SLICE-TRACKING-ID1 Tracking ID of the destination NonStop Blade Element
of the copy operation.
ZCMP-TKN-ECHO-STATUS1 Status of the FPGA 3 device for the destination
NonStop Blade Element (contents of the FPGA 3
status register, which might provide FPGA 3 hardware
error information).
ZCMP-TKN-ECHO-ERROR1 Contents of the FPGA 3 error register for the
destination NonStop Blade Element (contents of the
FPGA 3 status register, which might provide FPGA 3
hardware error information).
ZCMP-TKN-ECHO-CHANNEL Subject token that specifies the LID of the affected
channel.
ZCMP-TKN-ECHO-STATE State of the FPGA 3 copy logic (see Table 25-27
on
page 25-55).
Table 25-27. ZCMP-TKN-ECHO-STATE Values
Value Meaning
ZCMP-ENM-ECHO-STATE-OK No errors detected.
ZCMP-ENM-ECHO-STATE-ERROR FPGA 3 errors detected.
Token Description (page 2 of 2)