NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-61
Messages
Unconditional Tokens
Cause. PE reintegration could not start, possibly because of a hardware (PE) error.
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
200: ZCMP-EVT-ECHO-STATUS
FPGA 3 logic detected a state change.
Event-Message Text
On CPU <1>, PE on slice <2> (LID <3>) failed to enter state
to allow reintegration start
Slice module tracking ID: <4>
LSU0 module tracking ID: <5>
LSU1 module tracking ID: <6>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-EVT-
PE-REINT-START-TO (134).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-CPU Subject token that specifies the processor where the
PE resides.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop Blade
Element where PE reintegration timed out.
ZCPU-TKN-LID Subject token that specifies the LID of the PE whose
reintegration timed out.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element where the
PE resides.
ZCMP-TKN-LSU-TRACKING-ID Tracking ID of the first LSU to which the PE connects.
ZCMP-TKN-LSU-TRACKING-ID1 Tracking ID of the second LSU to which the PE
connects.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: No