NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-63
Messages
Cause. FPGA 3 logic detected a state change.
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-
INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the
NonStop Blade Element to which the
FPGA 3 device is connected.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade
Element where the PE resides.
ZCMP-TKN-ECHO-STATE State of the FPGA 3 copy logic (see
Table 25-27
on page 25-55).
ZCMP-TKN-ECHO-STATUS Status of the FPGA 3 device (contents
of the FPGA 3 status register, which
might provide FPGA 3 hardware error
information).
ZCMP-TKN-ECHO-ERROR Contents of the FPGA 3 error register
(contents of the FPGA 3 status register,
which might provide FPGA 3 hardware
error information).
ZCMP-TKN-ECHO-INFO Additional FPGA 3 information returned
for the source NonStop Blade Element
in hexadecimal (contents of the
echoAdditionalInfo field of the echoInfo
structure).
ZCMP-TKN-SLICE-ARRAY.ECHCN-NUM(n ) ID of channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-RCV(n ) Contents of the receive register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-EXP(n ) Contents of the expecting register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-XMT(n ) Contents of the transmit register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-NUMCHANS Number of channels on the NonStop
Blade Element.
Token Description (page2of2)