NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-67
Messages
Unconditional Tokens
Event-Message Text
All PEs on a slice are not reporting the same Node Name and
Node number
Slice ID : <1>
Slice module tracking ID : <2>
CPU : <11>, LID :<12>
Node Number : <13>, Node Name : <14>
<*IF 20 > CPU : <21>, LID : <22>
Node Number : <23>, Node Name : <24><*ENDIF>
<*IF 25 > CPU : <26>, LID : <27>
Node Number : <28>, Node Name : <29><*ENDIF>
<*IF 30 > CPU : <31>, LID : <32>
Node Number : <33>, Node Name : <34><*ENDIF>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is
ZCMP-EVT-COMPLEX-INVALID-2 (202).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-
INDETERMIN.
ZCPU-TKN-SLICEID Subject token that specifies the NonStop
Blade Element where the PEs reside.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element
where the PEs reside.
ZCMP-TKN-SLICE-ARRAY.CPU(n ) Subject token that specifies the processor of
PE n +1. (See the following note.)
ZCMP-TKN-SLICE-ARRAY.LID(n ) Subject token that specifies the LID of PE
n +1. (See the following note.)
ZCMP-TKN-SLICE-ARRAY. NODENUM(n ) Node number of PE n +1. (See the following
note.)
ZCMP-TKN-SLICE-ARRAY. NODENAME(n ) Node name of PE n +1. (See the following
note.)
ZCMP-TKN-SLICE-ARRAY.NUMLIDS Number of unique LIDs (PEs) on the
NonStop Blade Element.
Note. The node number and node name of each PE in a NonStop Blade Element can be
retrieved from any PE on that NonStop Blade Element. Node numbers and node names for all
PEs in a NonStop Blade Element are verified before all processors corresponding to the PEs
on the NonStop Blade Element are running. If not all processors are running, the value of
ZCMP-TKN-SLICE-ARRAY.CPU(n ) that corresponds to the value of ZCMP-TKN-SLICE-
ARRAY.LID(n ) is ‘NULL_CPU’ ID (255 decimal). The reason is that the correspondence
between processor numbers and NonStop Blade Element LID numbers cannot be determined
before the processor is running the NonStop operating system.