NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-72
Messages
Unconditional Tokens
Cause. The PEs comprising a processor in a NonStop Blade Complex are cabled to
an LSU that has the correct NonStop Blade Element ID but resides in another NonStop
Blade Complex.
Effect. The NonStop Blade Complex is invalid; therefore, CMAP cannot reintegrate its
PEs or reset its NonStop Blade Elements.
Recovery. Correct the PE/LSU cabling problem.
Event-Message Text
CPU <1> reported slice tracking IDs that do not match
the tracking IDs for the complex - complex invalid
Complex ID : <2>
Slice module tracking ID : <3>
Slice module tracking ID1 : <4>
Slice module tracking ID2 : <5>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-EVT-
COMPLEX-INVALID-5 (205).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-CPU Subject token that specifies the processor that
reported unexpected NonStop Blade Element tracking
IDs.
ZCMP-TKN-COMPLEX-ID ID of the affected NonStop Blade Complex.
ZCPU-TKN-SLICE-TRACKING-ID NonStop Blade Element tracking ID of the first
NonStop Blade Element in the NonStop Blade
Complex.
ZCPU-TKN-SLICE-TRACKING-ID1 NonStop Blade Element tracking ID of the second
NonStop Blade Element in the NonStop Blade
Complex.
ZCPU-TKN-SLICE-TRACKING-ID2 NonStop Blade Element tracking ID of the third
NonStop Blade Element in the NonStop Blade
Complex.