NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-81
Messages
Cause. Incoming reintegration cables come from different sides of the same NonStop
Blade Element. For example, channels 0 and 1 of the incoming NonStop Blade
Element connect to channels 1 and 0, respectively, of the other NonStop Blade
Element (cable crossover).
Effect. CMAP cannot reintegrate one or more PEs or reset one or more NonStop
Blade Elements. Miscabling the FPGA 3 device does not exclude CPUs from the
system, but it compromises the system’s ability to recover from PE failures.
Recovery. Correct the reintegration cabling problem as soon as possible.
211: ZCMP-EVT-ECHO-CABLING-ERR-4
Reintegration cables do not form a ring. (This event is generated for each NonStop
Blade Element in the NonStop Blade Complex.)
ZCMP-TKN-SLICE-ARRAY.ECHCN-XMT(n ) Contents of the transmit register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-NUMCHANS Number of channels on the NonStop
Blade Element.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: No
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCMP-TKN-COMPLEX-ID <1> token-type ZSPI-TYP-INT
ZCPU-TKN-SLICE-TRACKING-ID <2> token-type ZSPI-TYP-STRING
ZCMP-TKN-SLICE-ARRAY.ECHCN-NUM(0) <11> token-type ZSPI-TYP-
BYTE
ZCMP-TKN-SLICE-ARRAY.ECHCN-RCV(0) <12> token-type ZSPI-TYP-
INT
ZCMP-TKN-SLICE-ARRAY.ECHCN-EXP(0) <13> token-type ZSPI-TYP-
INT
ZCMP-TKN-SLICE-ARRAY.ECHCN-XMT(0) <14> token-type ZSPI-TYP-
INT
Token Description (page 2 of 2)