NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-86
Messages
Cause. A cabling or hardware error.
Effect. CMAP cannot reintegrate one or more PEs or reset one or more NonStop
Blade Elements. Miscabling the FPGA 3 device does not exclude CPUs from the
system, but it compromises the system’s ability to recover from PE failures.
Recovery. Correct the problem specified in preceding ZCMP event messages as soon
as possible.
214: ZCMP-EVT-ECHO-CABLING-VALID
An invalid reintegration cabling configuration became valid.
Unconditional Tokens
ZCPU-TKN-SLICE-TRACKING-ID1 Tracking ID of the second NonStop Blade Element in
the NonStop Blade Complex.
ZCPU-TKN-SLICE-TRACKING-ID2 Tracking ID of the third NonStop Blade Element in the
NonStop Blade Complex.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCMP-TKN-COMPLEX-ID <1> token-type ZSPI-TYP-INT
ZCPU-TKN-SLICE-TRACKING-ID <2> token-type ZSPI-TYP-STRING
ZCPU-TKN-SLICE-TRACKING-ID1 <3> token-type ZSPI-TYP-STRING
ZCPU-TKN-SLICE-TRACKING-ID2 <4> token-type ZSPI-TYP-STRING
Event-Message Text
Echo cabling in complex ID <1> has been declared valid
Slice module tracking ID: <2>
Slice module tracking ID1: <3>
Slice module tracking ID2: <4>
Token Description (page1of2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-
EVT-ECHO-CABLING-VALID (214).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
Token Description (page2of2)