NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-92
Messages
Cause. See Table 25-30.
Effect. The PE might be stopped. If there is a cabling problem, the PE might continue
to run, but might be unable to participate in reintegrations.
Recovery. Contact your service provider.
ZCMP-TKN-PE1-OLDSTATUS Previous status of the second PE (see
Table 25-30
).
ZCMP-TKN-PE2-STATUS Status of the third PE (see Table 25-30
).
ZCMP-TKN-PE2-OLDSTATUS Previous status of the third PE (see
Table 25-30
).
ZCMP-TKN-STRAND1-STATUS Status (from the LSU register) of the first strand
connecting the LSU to the PE.
ZCMP-TKN-STRAND1-OLDSTATUS Previous status (from the LSU register) of the
first strand connecting the LSU to the PE.
ZCMP-TKN-STRAND2-STATUS Status (from the LSU register) of the second
strand connecting the LSU to the PE.
ZCMP-TKN-STRAND2-OLDSTATUS Previous status (from the LSU register) of the
second strand connecting the LSU to the PE.
ZCMP-TKN-STRAND3-STATUS Status (from the LSU register) of the third strand
connecting the LSU to the PE.
ZCMP-TKN-STRAND3-OLDSTATUS Previous status (from the LSU register) of the
third strand connecting the LSU to the PE.
Table 25-30. ZCMP-TKN-PEn-[OLD]STATUS Values
Value Meaning
ZCMP-ENM-PE-NOT-PRESENT PE not present.
ZCMP-ENM-PE-NO-RESPONSE PE not responding.
ZCMP-ENM-PE-ERROR PE returned error.
ZCMP-ENM-PE-STOP PE stopped.
ZCMP-ENM-PE-PRIMITIVE PE in primitive mode.
ZCMP-ENM-PE-HSS PE executing HSS.
ZCMP-ENM-PE-NSK PE executing NSK.
Token Description (page2of2)