NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-94
Messages
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
219: ZCMP-EVT-SLICE-NO-PES
No PEs on a NonStop Blade Element are responding.
Unconditional Tokens
Cause. Either:

A NonStop Blade Element was removed.

A NonStop Blade Element encountered a failure that affects all PEs, such as a
NonStop Blade Element power failure.
Effect. None.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCMP-TKN-COMPLEX-ID <1> token-type ZSPI-TYP-INT
ZCPU-TKN-SLICEID <2> token-type ZSPI-TYP-BYTE
ZCPU-TKN-SLICE-TRACKING-ID <3> token-type ZSPI-TYP-STRING
Event-Message Text
In complex <1>, no PEs on slice <2> are responding
Slice module tracking ID : <3>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-EVT-
EVT-SLICE-NO-PES (219).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCMP-TKN-COMPLEX-ID ID of the affected NonStop Blade Complex.
ZCPU-TKN-SLICEID NonStop Blade Element ID of the NonStop Blade
Element whose PEs are not responding.
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element whose PEs
are not responding.