NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-98
Messages
Cause. One or more reintegration cables is either missing, broken, or connected to a
NonStop Blade Element that is not operating.
Effect. CMAP cannot reintegrate one or more PEs or reset one or more NonStop
Blade Elements. Miscabling the FPGA 3 device does not exclude CPUs from the
system, but it compromises the system’s ability to recover from PE failures.
Recovery. Correct the reintegration cabling problem as soon as possible.
222: ZCMP-EVT-COMPLEX-INVALID-6
A NonStop Blade Complex is invalid because its NonStop Blade Elements report
different numbers of PEs.
ZCMP-TKN-ECHO-ERROR Contents of the FPGA 3 error register
(contents of the FPGA 3 status register,
which might provide FPGA 3 hardware
error information).
ZCMP-TKN-ECHO-INFO Additional FPGA 3 information returned
for the source NonStop Blade Element
in hexadecimal (contents of the
echoAdditionalInfo field of the echoInfo
structure).
ZCMP-TKN-SLICE-ARRAY.ECHCN-RCV(n ) Contents of the receive register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-EXP(n ) Contents of the expecting register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-XMT(n ) Contents of the transmit register for
channel n +1.
ZCMP-TKN-SLICE-ARRAY.ECHCN-NUMCHANS Number of channels on the NonStop
Blade Element.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: No
Token Description (page2of2)