NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-102
Messages
Unconditional Tokens
Cause. The error is caused by a corruption of the RAM used to configure hardware
logic on the memory reintegration board.
Effect. The link for processor memory reintegration cannot be used until the error is
corrected.
Effect. The error is corrected by a reset of the blade element containing the affected
memory reintegration board.
Event-Message Text
Configuration image error on slice <1> detected
Slice module tracking ID : <2>
Echo slice 0 Error register : 0x<3>
Echo slice 1 Error register : 0x<3>
Echo slice 2 Error register : 0x<3>
Call Development : 0x<6>
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is
ZCMP_EVT_ECHO_CRAM_ERROR (224).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCMP-TKN-COMPLEX-ID ID of the affected NonStop Blade Complex.
ZCPU-TKN-SLICEID NonStop Blade Element ID of the NonStop Blade
Element that detected the error..
ZCPU-TKN-SLICE-TRACKING-ID Tracking ID of the NonStop Blade Element that
detected the error.
ZCPU-TKN-ECHO-ERROR-0 Contents of the hardware error register of the first
NonStop Blade Element in the NonStop Blade
Complex.
ZCPU-TKN-ECHO-ERROR-1 Contents of the hardware error register of the second
NonStop Blade Element in the NonStop Blade
Complex.
ZCPU-TKN-ECHO-ERROR-2 Contents of the hardware error register of the third
NonStop Blade Element in the NonStop Blade
Complex.
ZCPU-TKN-CALL-DEV A code indicating the configuration step when the error
was detected.