NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-104
Messages
Cause. Power supply failure or loss of alternating current to a power supply.
Effect. If redundancy is lost, a second failure causes the NonStop Blade Element to
fail.
Recovery. Check redundant power and repair it if necessary.
301: ZCMP-EVT-SLICE-ESC-CHANGE
Environmental sense and control (ESC) status changed.
ZCMP-TKN-GMS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-
MODULE
Module identification of the affected NonStop Blade
Element.
ZCMP-TKN-GMS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-SLOT
Slot identification of the affected NonStop Blade
Element.
ZCPU-TKN-SLICE-TRACKING-ID NonStop Blade Element tracking ID of the affected
NonStop Blade Element.
ZCMP-TKN-POWER-STATE Indicates whether power to the NonStop Blade Element
is redundant.
ZCMP-TKN-POWER-OLDSTATE Indicates whether power to the NonStop Blade Element
was redundant.
Potentially critical event: No
Action event: No
Message sender: CMAP
$ZLOG: Yes
$0: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCPU-TKN-SLICEID <1> token-type ZSPI-TYP-BYTE
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-GROUP
<2> token-type ZSPI-TYP-STRING
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-MODULE
<3> token-type ZSPI-TYP-STRING
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-SLOT
<4> token-type ZSPI-TYP-STRING
ZCPU-TKN-SLICE-TRACKING-ID <5> token-type ZSPI-TYP-STRING
ZCMP-TKN-BMC-STATUS <6> token-type ZSPI-TYP-BOOLEAN
Token Description (page2of2)