NonStop Operating System Event Management Programming Manual

Complex Manager Auxiliary Process (CMAP) Event
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-108
Messages
Unconditional Tokens
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZEMS-TKN-EMPHASIS token-type ZSPI-TYP-BOOLEAN
ZEMS-TKN-ISO-SEVERITY token-type ZSPI-TYP-ISO-
SEVERITY
ZCPU-TKN-SLICEID <1> token-type ZSPI-TYP-BYTE
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-GROUP
<2> token-type ZSPI-TYP-STRING
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-MODULE
<3> token-type ZSPI-TYP-STRING
ZCMP-TKN-GMS.ZEMS-DDL-PHYSICAL-ADDRESS.ZPA-SLOT
<4> token-type ZSPI-TYP-STRING
ZCPU-TKN-SLICE-TRACKING-ID <5> token-type ZSPI-TYP-STRING
ZCMP-TKN-LED-ID <6> token-type ZSPI-TYP-ENUM
ZCMP-TKN-SLED-STATUS <7> token-type ZSPI-TYP-INT
ZCMP-TKN-SLED-OLDSTATUS <8> token-type ZSPI-TYP-INT
Event-Message Text
Slice <1> LED <6> state change
Slice Physical Location :
Group : <2>
Module : <3>
Slot : <4>
Slice module tracking ID : <5>
LED old state : <8>, new state : <7>
Token Description (page1of2)
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCMP-
EVT-SLICE-LED-CHANGE (302).
ZEMS-TKN-EMPHASIS Value is ZSPI-VAL-FALSE.
ZEMS-TKN-ISO-SEVERITY Value is ZEMS-VAL-SEVERITY-INDETERMIN.
ZCPU-TKN-SLICEID NonStop Blade Element ID of the affected
NonStop Blade Element.
ZCMP-TKN-GMS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-GROUP
Group identification of the affected NonStop
Blade Element.
ZCMP-TKN-GMS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-MODULE
Module identification of the affected NonStop
Blade Element.
ZCMP-TKN-GMS.ZEMS-DDL-
PHYSICAL-ADDRESS.ZPA-SLOT
Slot identification of the affected NonStop Blade
Element.
ZCPU-TKN-SLICE-TRACKING-ID NonStop Blade Element tracking ID of the
affected NonStop Blade Element.
ZCMP-TKN-LED-ID ID of the LED that changed status (see
Table 25-34
).