NonStop Operating System Event Management Programming Manual
Complex Manager Auxiliary Process (CMAP) Event 
Messages (ZCMP)
HP NonStop Operating System Event Management Programming Manual—520372-020
25-124
Messages
Conditional Token
Cause. Either a usable SAD process (NSADPR) cannot be found in either default 
directory (SYSnn or SYSTEM) or a running SAD process encountered an 
unrecoverable error.
Effect. The affected processor loses all environmental monitoring.
If the value of ZCMP-TKN-SAD-FAILURE-TYPE is ZCMP-ENM-SAD-LAUNCH-FAIL 
(that is, CMAP could not launch a SAD process), only one event is generated (retries 
are useless).
If the value of ZCMP-TKN-SAD-FAILURE-TYPE is ZCMP-ENM-SAD-STOPPED (that 
is, the SAD process stopped or abended after being launched), CMAP tries to restart 
the SAD process up to four times. After the fourth time, if the SAD process has not 
provided CMAP with updated information, CMAP does not try again to restart the SAD 
process. If, during any retry, the SAD process provides CMAP with updated 
information, CMAP resets the retry count. See Figure 25-2.
Recovery. Contact your service provider.
Token Description
ZCMP-TKN-RETRIES Number of times CMAP tried to restart the SAD 
process without receiving updated information from it 
(maximum is four).
Table 25-40. ZCMP-TKN-SAD-FAILURE-TYPE Values
Value Meaning
ZCMP-ENM-SAD-LAUNCH-FAIL Launch of SAD process failed.
ZCMP-ENM-SAD-STOPPED SAD process stopped or abended.










