NonStop Operating System Event Management Programming Manual

System Monitor Event Messages (ZMON)
HP NonStop Operating System Event Management Programming Manual—520372-020
7-14
Messages
Unconditional Tokens
Cause. An error occurred during the startup message sequence for the COUP
process when doing a system load or a reload of a processor.
Effect. COUP was started but it did not complete the required dynamic configuration
changes for the loading processor. If COUP was used to modify the configuration of
the loading processor, the state of the modifications for the processor is unknown.
Recovery. Halt the processor. The error codes might provide possible cause and
recovery actions. After attempting the corrective action provided for a particular error,
reload the processor. If the error continues to occur, see Recovery Action Requiring
Vendor Support on page 7-7.
112: ZMON-EVT-INITCICREATEERR
The call to the PROCESS_CREATE_ procedure to create the startup command
interpreter failed.
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZMON-
EVT-COUP-WARNING (111).
ZMON-TKN-CPU Subject token that specifies the processor number
of the processor that is reporting the event.
ZGRD-VAL-SSID.ZSPI-TKN-ERRLIST PROCESS_CREATE_ error list.
ZGRD-TKN-ERRORCODE Error returned by the PROCESS_CREATE
procedure.
ZGRD-TKN-ERRORDETAIL Error detail returned by the file-system.
Subject: ZMON-TKN-CPU
Potentially critical event: Yes
Action event: No
Message sender: Monitor process
TMDS collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZMON-TKN-CPU token-type ZSPI-TYP-UINT
ZGRD-TKN-ERRORCODE token-type ZSPI-TYP-ENUM
ZGRD-TKN-OBJECTFILE token-type ZSPI-TYP-FNAME
ZGRD-TKN-SWAPFILE token-type ZSPI-TYP-FNAME
Event-Message Text
FAILURE creating Cold Load Command Interpreter,
Newprocess Error errnum