NonStop Operating System Event Management Programming Manual

System Clock Event Messages (ZCLK)
HP NonStop Operating System Event Management Programming Manual—520372-020
8-16
Messages
Recovery. If ZCLK-TKN-RMIIOERROR is %12, no recovery action is necessary. The
system automatically updates the RMI clock every hour, and the RMI clock can run for
two hours without an update.
If ZCLK-TKN-RMIIOERROR is a value other than %12 (indicating a hardware
problem), see Recovery Action Requiring Vendor Support on page 8-7.
If ZCLK-TKN-SPIOERROR is %12, no recovery action is necessary. The system
automatically updates the SP clock every hour, and the SP clock can run for two hours
without an update.
If ZCLK-TKN-SPIOERROR is a value other than %12 (indicating a hardware problem),
see Recovery Action Requiring Vendor Support on page 8-7.
106: ZCLK-EVT-COLDLOAD
System time was initialized during a system load.
Unconditional Tokens
Cause. System time was initialized during a cold load. The system cold load has
completed successfully.
Effect. None.
Recovery. This is an informational message only; no corrective action is needed.
Subject: ZCLK-TKN-SYSCLOCK
Potentially critical event: No
Action event: No
Message sender: Monitor process
TMDS collector: Yes
OSM/TSM collector: Yes
Unconditional Tokens
ZEMS-TKN-EVENTNUMBER token-type ZSPI-TYP-INT
ZCLK-TKN-SYSCLOCK token-type ZSPI-TYP-UINT
Event-Message Text
SYSTEM COLD LOAD COMPLETE
Token Description
ZEMS-TKN-EVENTNUMBER Event number for this message. Value is ZCLK-EVT-
COLDLOAD (106).
ZCLK-TKN-SYSCLOCK Subject token that specifies that this is a system time event.