NonStop Operating System Event Management Programming Manual

Labeled-Tape Server Events Messages (ZTAP)
HP NonStop Operating System Event Management Programming Manual—520372-020
9-2
618: ZTAP-EVT-USEANSITAPEERR An ANSI labeled tape was requested, but
the mounted tape volume is an IBM
labeled tape.
619: ZTAP-EVT-WRITEPROTECTERR
A file write-protect error occurred.
620: ZTAP-EVT-NOTMFTAPEERR
The mounted tape volume is a TMF
tape—do not use it.
621: ZTAP-EVT-INPUTINCOMPERR
A file did not end on the last volume
specified in the DEFINE attribute.
622: ZTAP-EVT-USEBACKUPTAPEERR
The mounted tape volume is an IBM
labeled tape. Use a BACKUP labeled tape
or an ANSI labeled tape instead.
623: ZTAP-EVT-USETMFNOTANSIERR
The mounted tape volume is an ANSI
labeled tape. Use a TMF labeled tape
instead.
624: ZTAP-EVT-USETMFNOTIBMERR
The mounted tape volume is an IBM
labeled tape. Use a TMF labeled tape
instead.
625: ZTAP-EVT-USETMFNOTBKUPERR
The mounted tape volume is a BACKUP
labeled tape. Use a TMF labeled tape
instead.
626: ZTAP-EVT-BADTRAILERERR
The system failed to finish writing the
trailer labels.
628: ZTAP-EVT-BADDEFINEERR
The tape process detected an invalid
value in a DEFINE while processing an
open request.
629: ZTAP-EVT-USESCRATCHERR
The mounted tape is an unlabeled tape
but a scratch tape was requested.
630: ZTAP-EVT-OPENRECEIVEERR
$ZSVR failed to open $RECEIVE.
631: ZTAP-EVT-READRECEIVEERR
$ZSVR failed to read $RECEIVE.
632: ZTAP-EVT-NOMEMERR
Insufficient memory is available to run
$ZSVR.
633: ZTAP-EVT-DATALENERR
$ZSVR received an incomplete data buffer
from MEDIACOM.
634: ZTAP-EVT-VOLUMEREJECT
The mount request for the specified tape
volume was rejected by the operator.
635: ZTAP-EVT-ZSVRUP
$ZSVR was successfully started.
636: ZTAP-EVT-TAPECOMREJECT
The operator used MEDIACOM to reject a
mount or device request.
637: ZTAP-EVT-TAPECOMACCEPT
The operator used MEDIACOM to accept
a mount or device request.
Table 9-1. Labeled-Tape Server Event Messages (page 2 of 7)
Event Number and Symbolic Name Description